{ "id": "floor-drain-odour-seal-core-2-pack", "sku": "floor-drain-odour-seal-core-2-pack", "title": "Floor Drain Odour Seal Core, 2 Pack", "slug": "floor-drain-odour-seal-core-2-pack", "price": 19.99, "currency": "EUR", "availability": "in_stock", "category": "floor-drain-covers", "category_label": "Floor Drain Covers & Odour Seals", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": null, "images": [ "https://drains.eu.com/dropship-images/floor-drain-covers/floor-drain-odour-seal-core-2-pack/main-floor-drain-odour-seal-core-2-pack.jpg", "https://drains.eu.com/dropship-images/floor-drain-covers/floor-drain-odour-seal-core-2-pack/floor-drain-odour-seal-core-2-pack-2.jpg", "https://drains.eu.com/dropship-images/floor-drain-covers/floor-drain-odour-seal-core-2-pack/floor-drain-odour-seal-core-2-pack-3.jpg", "https://drains.eu.com/dropship-images/floor-drain-covers/floor-drain-odour-seal-core-2-pack/floor-drain-odour-seal-core-2-pack-9.jpg" ], "description_short": "A removable silicone and plastic insert that drops into a standard 3.5 cm drain groove, closes after the water passes, and helps keep odours, insects and backflow where they belong.", "description": "The smell nobody can find\n\nThere is a particular kind of bathroom smell that has no source. The towels are clean. The bin is empty. You have scrubbed the tiles. And still, when you walk in first thing in the morning, something sour hangs in the air for a second before it fades.\n\nNine times out of ten it is the floor drain.\n\nA floor waste is the small grate set into the tiles, usually in the shower area or near it. Below that grate there is meant to be a water barrier, a small amount of standing liquid that blocks air from the sewer line coming back up. In a lot of homes that barrier is either very shallow or has dried out completely, especially in a guest bathroom or a laundry that is not used every day. Once it is gone, the pipe is simply an open channel into your room.\n\nThat is the problem a floor drain odour seal core is built to solve. It is not a cleaner and it is not a fragrance. It is a physical barrier you drop into the drain.\n\nHow a seal core works\n\nThink of it as a one way door.\n\nThe core sits inside the throat of the drain, underneath the grate you can already see. Inside it there is a flexible silicone valve. When water runs, the weight and pressure of that water push the valve open and it drains away. When the water stops, the valve returns to its closed position and the opening is covered again.\n\nBecause the moving part is silicone rather than metal, it does not need a precise machined seat to work. Flexible material can close against a slightly imperfect surface, which is useful in a drain that has seen a few years of mineral deposits and soap film. It also will not rust. Older designs often used a hinged metal flap, and in a wet space those flaps tend to pit, stiffen and eventually stick half open.\n\nThis particular core is listed as plastic and silicone with a transparent finish, so once the grate is back on top, you will barely know it is there.\n\nWho this suits\n\nApartment dwellers notice drain odours more than anyone, because floor wastes in apartments often connect to shared stacks and the air pressure in those stacks changes every time a neighbour runs a bath. If you get a smell that comes and goes with no obvious pattern, that is often why.\n\nOlder houses are the second common case. Renovations change pipe runs, and a waste that was fine in 1975 may now sit at the end of a line that never holds water.\n\nThen there are the seasonal homes, the holiday units, the spare bathroom nobody uses between visits. Any drain that goes a fortnight without water will lose its trap seal to evaporation. A closing valve does not rely on standing water, so it keeps doing its job while the house is empty.\n\nIt also appeals to anyone dealing with insects. Drain flies and small crawling insects use open pipes as a highway. Putting a closed valve in the way removes the easy route. That is the honest way to think about a drain insect barrier. It does not exterminate anything, it just takes away the door.\n\nMeasuring before you buy\n\nThis is the step people skip, and it is the one that causes returns.\n\nLift your grate. Most lift straight out, though some have a single screw holding them. Look down into the opening and measure across the middle of the groove where the insert will sit. This core is made for a groove of roughly 3.5 cm, with a body measuring 5.3 cm wide by 5.3 cm high.\n\nIf your opening is close to that, you are in good shape. If it is significantly wider, the core will sit loose and the seal will not do much. If it is narrower, it simply will not go in. Floor wastes are not standardised across every market, so five minutes with a tape measure saves a lot of frustration.\n\nAlso check the depth available below the grate. There needs to be enough room for the core to drop in without the grate sitting proud of the tiles afterwards.\n\nFitting it\n\nThe installation is genuinely simple.\n\nTake the grate off. Clear out whatever has gathered in the opening, which in a shower usually means a fairly grim handful of hair. A gloved hand or a bent piece of wire does the job. Give the inside of the opening a wipe so the core is pressing against a clean surface rather than a layer of slime.\n\nPush the core down into the groove until it seats. Run some water to check it drains properly and that nothing is catching. Then put the grate back on top.\n\nNo glue, no tape, no tools. That matters, because the whole point of a removable core is that you can take it out again next month.\n\nKeeping it clean\n\nHere is the honest part. A drain insert does not eliminate cleaning. It relocates it.\n\nEverything that used to disappear down the pipe now gathers on top of the core instead. Hair, soap film, shampoo residue, lint from the washing machine. The good news is that it is all sitting in one place where you can lift it out, rather than coating the inside of a pipe where you cannot reach.\n\nA rinse every few weeks keeps a shower drain happy. Pull the core out, run it under warm water, work an old toothbrush around the silicone if there is a film on it, then put it back. Mild dish soap is fine. Skip the solvents and the abrasive pads, since scratching the silicone gives residue something to cling to.\n\nLaundry drains usually need less attention, but check after a few wash cycles to see how much lint is collecting. Balcony and outdoor drains need more, because leaves and grit arrive from outside.\n\nIf water starts pooling around the drain, that is your reminder. It almost always means the core needs a rinse, not that it has failed.\n\nWhy two cores\n\nThe pack contains two, which is more useful than it first sounds.\n\nMost homes have more than one floor waste. A bathroom and a laundry, or two bathrooms. Doing both at once means you are not chasing the same problem twice.\n\nIf you only have one drain, the second core becomes the replacement. Silicone parts in a constantly wet environment are consumables. They stay flexible for a long time, but eventually the valve softens or a small tear appears and it stops closing cleanly. When that happens you want a spare in the drawer, not a two week wait for a delivery while the smell comes back.\n\nWhat it will not do\n\nWorth being straight about this.\n\nA seal core is not a plumbed non return valve. If you have had actual backflow events, with water pushing up through the floor, that is a plumbing issue and a drain insert is not the fix. Call a plumber.\n\nIt also will not clear a blocked pipe. If your drain was slow before you fitted anything, it will still be slow afterwards, and you may blame the core unfairly. Clear the blockage first, then fit the insert.\n\nAnd it will not help with smells coming from a basin or a sink, which have their own traps and their own problems.\n\nThe short version\n\nIf your bathroom or laundry has a drain smell you cannot track down, the floor waste is the first place to look. An anti odour drain insert adds a closing silicone valve where you currently have an open pipe, and it does that without any plumbing work.\n\nMeasure your drain groove first and check it is near 3.5 cm. Fit the core under your existing grate. Rinse it every few weeks. Keep the second core for when the first one has done its time.\n\nIt is a small thing. It also happens to be one of the cheapest fixes for a problem that quietly affects how a whole room feels.", "llm_summary": "The Floor Drain Odour Seal Core is a removable insert sold as a pack of two under the Qrity brand. It is made from plastic and silicone with a transparent finish, and measures 5.3 cm wide by 5.3 cm high. It is designed to fit a floor drain groove of approximately 3.5 cm. The core sits inside an existing floor waste beneath the grate and includes a sealing valve intended to close between uses, which helps limit drain odours, insects and backflow entering the room. The core is removable by hand for rinsing and clearing hair or soap residue. Country of origin is listed as China. Weight, overall product dimensions beyond width and height, and warranty are not specified by the maker.", "returnable": true, "return_policy": "14-day right of withdrawal from delivery under the Consumer Rights Directive 2011/83/EU, buyer pays the direct cost of return; two-year legal guarantee of conformity under Directive (EU) 2019/771 for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Drains Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://drains.eu.com/floor-drain-odour-seal-core-2-pack/", "canonical_url": "https://drains.eu.com/floor-drain-odour-seal-core-2-pack/", "json_url": "https://drains.eu.com/api/products/floor-drain-odour-seal-core-2-pack.json", "updated_at": "2026-10-12" }