{
  "id": "shower-drain-hair-strainer-insert-set",
  "sku": "shower-drain-hair-strainer-insert-set",
  "title": "Shower Drain Hair Strainer Insert Set with Immersion Pipes (2 Pack)",
  "slug": "shower-drain-hair-strainer-insert-set",
  "price": 21.99,
  "currency": "EUR",
  "availability": "in_stock",
  "category": "shower-drain-hair-catchers",
  "category_label": "Shower & Bath Hair Catchers",
  "tags": [],
  "colors": [],
  "materials": [],
  "dimensions": null,
  "weight": null,
  "images": [
    "https://drains.eu.com/dropship-images/shower-drain-hair-catchers/shower-drain-hair-strainer-insert-set/main-shower-drain-hair-strainer-insert-set.jpg",
    "https://drains.eu.com/dropship-images/shower-drain-hair-catchers/shower-drain-hair-strainer-insert-set/shower-drain-hair-strainer-insert-set-3.jpg",
    "https://drains.eu.com/dropship-images/shower-drain-hair-catchers/shower-drain-hair-strainer-insert-set/shower-drain-hair-strainer-insert-set-6.jpg"
  ],
  "description_short": "Two wave-pattern sieve inserts, two immersion pipes and two nylon buckle hair clips, made from durable plastic and built to drop straight into Tempoplex style drain fittings 6960, 6961, 6962 and 6963.",
  "description": "The slow shower nobody notices until it is too late\n\nA shower drain fails gradually. One week the water takes a second longer to clear. A month later you are standing in a shallow puddle. By the time it is obvious, there is usually a dense plug of hair and soap sitting somewhere in the first bend of the waste pipe, and getting it out means either a chemical that smells like a swimming pool or a half hour on your knees with a plumbing snake.\n\nThe frustrating part is how preventable it is. Almost all of that blockage walked in through an open drain in the form of loose hair. Stop the hair at the surface and the pipe below stays clear. That is the entire job of a shower drain hair strainer insert set, and it is why such a cheap part has so much force over how your bathroom behaves.\n\nHow a sieve insert and immersion pipe work together\n\nMost modern shower wastes are built in layers. There is the drain body set into the tray, an immersion pipe that drops down inside it, and a sieve or filter that sits at the top where you can see it. The immersion pipe is not decoration. Its lower end sits below the water held in the trap, which is what stops sewer gas rising up into the room. If that pipe is cracked, missing or badly seated, you get smells.\n\nThe sieve handles solids. On this set it uses a wave structure rather than a flat screen. The difference matters more than it sounds. A flat perforated disc concentrates the flow through a small number of holes, and the first clump of hair that lands on it tends to block several at once. A wave pattern spreads the open area across a shaped surface, so hair drapes over the ridges while water continues to find a way through the valleys. You still have to clean it, but it keeps draining properly for longer between cleans.\n\nThe two parts are usually replaced together because they wear together. Years of hot water, shampoo and the occasional yank from someone clearing a blockage take their toll on thin plastic. If you are already lifting the sieve out, putting in a fresh immersion pipe at the same time is a sensible five extra seconds of work.\n\nWho this set is for\n\nIf your shower has a Tempoplex style drain fitting carrying one of the numbers 6960, 6961, 6962 or 6963, this is aimed at you. It is also listed as a replacement for model 6961.96, item 582 951. Those fittings are extremely common in shower trays, which is why spare inserts for them sell steadily.\n\nBeyond compatibility, the people who benefit most are households with long hair, shared bathrooms, and anyone renting a property where calling out a plumber for a slow drain feels like an overreaction. Landlords often buy a few sets at a time, because a working hair catcher in every shower quietly removes one of the most common maintenance complaints.\n\nIt is less useful if your shower uses a linear channel drain or a bath style waste with a plug. Those need their own parts. Buying the wrong insert is the single most common mistake with this product category, and it is avoidable in thirty seconds.\n\nHow to check you are ordering the right part\n\nBefore anything else, get the number. Lift out whatever is currently in your drain and look at the underside and the outer rim. Manufacturers mould a model number into the plastic, and it is usually legible once you have rinsed the soap off. If the existing part has already been thrown away, check the paperwork from the shower tray or search the tray model on the manufacturer's spare parts pages.\n\nSecond, look at the shape. Compare your old part to the product photos. The outer profile, the depth of the stem and whether there is a central pipe or just a disc will tell you a lot. If your existing insert is a simple flat grille with no immersion tube, this set is probably not a direct match.\n\nThird, think about quantity. This pack contains two complete sets. If you have one shower, you are buying a spare for later, which most people are happy with. If you have two or three bathrooms, you may want more than one pack so every drain gets the same treatment on the same afternoon.\n\nFitting it without any drama\n\nThere is nothing technical here. Turn off the shower, lift or twist the old insert free, and set it aside. If it is stuck, run hot water for a minute to soften the soap residue around it, then twist as you pull. Do not lever it out with a screwdriver, because the drain body is plastic too and it cracks.\n\nDrop the new immersion pipe in, making sure it goes down straight and sits at the right depth. Then fit the sieve and press firmly with the thumbs of both hands until you feel it seat. Run the water for thirty seconds and watch it drain. If it clears freely and there is no smell, you are finished.\n\nThe nylon buckle hair clips in the pack have a curved profile and help keep things in position while you work. They are a minor extra, but they stop the sieve floating back up on the first run of water before it has fully settled.\n\nKeeping it working\n\nThe maintenance routine is one minute, every week or two. Lift the sieve out. Tip the hair into the bin, not back down the drain, which defeats the whole exercise. Rinse the insert under warm water and use an old toothbrush on the grooves if soap has built up. Push it back in, press firmly, and that is it.\n\nAvoid harsh drain chemicals where you can. They are rough on plastic parts and they are rarely needed once a hair trap is doing its job. If you do use one, take the insert out first and rinse everything thoroughly afterwards. Abrasive scouring pads are another thing to skip, since they scratch the polished surface and give soap film something to grip.\n\nReplace the insert if you see a crack, if it no longer presses home firmly, or if the sieve has deformed. That is what the second set in the pack is for.\n\nWhat this part cannot do\n\nHonesty helps here. A hair strainer stops hair entering the pipe. It does not dissolve the soap scum that has already built up over the years, and it will not help with a blockage further down your waste system or in the main stack. If your shower drained badly before you fitted it, clear the existing blockage first and then fit the strainer to stop the problem returning.\n\nIt also will not make a drain smell free if the trap itself is dry or damaged. The immersion pipe helps, but a properly working trap with water in it is what actually blocks the odour. If smells persist after fitting, the issue is elsewhere.\n\nThe short version\n\nA shower drain hair strainer insert set is the cheapest preventative maintenance in a bathroom. This Sophisticate two pack gives you two wave pattern sieves, two immersion pipes and two nylon buckle hair clips, made from plastic with a polished finish and designed for drain fittings 6960, 6961, 6962 and 6963.\n\nCheck the number on your existing part, fit the new one in two minutes with no tools, and rinse it every week or two. Do that and the slow shower problem simply stops being part of your life. For the price of a couple of coffees, that is a fair deal.",
  "llm_summary": "The Sophisticate shower drain hair strainer insert set (model JS-07766) is a two pack of replacement drain parts for shower wastes. Each pack contains two hair sieve inserts, two immersion pipes and two nylon buckle hair clips. The sieves use a wave structure that catches hair and debris while allowing water to pass, helping prevent slow drainage and blockages. The parts are made from plastic with a polished finish and are removable for rinsing under water. They are described as a replacement for model 6961.96, item 582 951, and as compatible with drain fittings 6960, 6961, 6962 and 6963. Country of origin is China. Colour, exact dimensions and product weight are not specified by the maker.",
  "returnable": true,
  "return_policy": "14-day right of withdrawal from delivery under the Consumer Rights Directive 2011/83/EU, buyer pays the direct cost of return; two-year legal guarantee of conformity under Directive (EU) 2019/771 for faulty goods. Return postage on faulty goods is ours.",
  "shipping_profile": "standard",
  "warranty": null,
  "brand": "Drains Company",
  "gtin": null,
  "mpn": null,
  "condition": "new",
  "url": "https://drains.eu.com/shower-drain-hair-strainer-insert-set/",
  "canonical_url": "https://drains.eu.com/shower-drain-hair-strainer-insert-set/",
  "json_url": "https://drains.eu.com/api/products/shower-drain-hair-strainer-insert-set.json",
  "updated_at": "2026-10-12"
}