{ "id": "silicone-bath-plug-3-pack", "sku": "silicone-bath-plug-3-pack", "title": "Silicone Bath Plug 3 Pack", "slug": "silicone-bath-plug-3-pack", "price": 25.99, "currency": "EUR", "availability": "in_stock", "category": "sink-and-bath-plugs", "category_label": "Sink & Bath Plugs", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "135 g", "images": [ "https://drains.eu.com/dropship-images/sink-and-bath-plugs/silicone-bath-plug-3-pack/main-silicone-bath-plug-3-pack.jpg", "https://drains.eu.com/dropship-images/sink-and-bath-plugs/silicone-bath-plug-3-pack/silicone-bath-plug-3-pack-2.jpg", "https://drains.eu.com/dropship-images/sink-and-bath-plugs/silicone-bath-plug-3-pack/silicone-bath-plug-3-pack-3.jpg", "https://drains.eu.com/dropship-images/sink-and-bath-plugs/silicone-bath-plug-3-pack/silicone-bath-plug-3-pack-4.jpg", "https://drains.eu.com/dropship-images/sink-and-bath-plugs/silicone-bath-plug-3-pack/silicone-bath-plug-3-pack-5.jpg" ], "description_short": "Three soft silicone discs with a built-in suction handle seal baths, sinks and kitchen drains, then wipe clean and stick to the tile until you need them again.", "description": "The small annoyance that ruins a bath\n\nYou run the taps, get the temperature right, climb in, and ten minutes later the water is sitting somewhere around your hips instead of your shoulders. Something is leaking past the plug. So you top it up with hot water, and it leaks again, and the whole point of the bath quietly evaporates.\n\nThis is one of those household problems that nobody fixes for ages because it feels too minor to deal with and too annoying to ignore. The usual cause is simple. The original plug has perished, the chain has broken off at the rubber, or the pop-up waste underneath the basin has stopped sealing properly. Finding the exact matching part means knowing the brand of the waste fitting, which almost nobody does, and ordering a component that may or may not arrive in the right size.\n\nA flat silicone plug avoids that whole chain of events. It does not care what brand your waste fitting is, because it never touches the fitting. It sits on the flat surface around the drain and seals there instead.\n\nHow a flat suction plug works\n\nThe design is straightforward. You have a soft silicone disc, 13 cm across in this case, with a moulded cup in the middle.\n\nWet the area around the drain, lay the disc over the opening, and press down on the cup. Air gets squeezed out from underneath, and the pressure difference pulls the plug tight against the surface. Water pushes down on top of it, which actually helps the seal rather than hurting it. The heavier the bath gets, the harder the plug is pressed down.\n\nPulling it out works in reverse. You grab the raised cup, pull, and air rushes in underneath to break the suction. The plug lifts off in one piece. There is no chain to snap, no slippery rim to pinch at with wet fingertips, and nothing to fish for at the bottom of a full tub.\n\nTwo things make or break that seal. The first is a flat landing area. If the surface around your drain is smooth metal or smooth enamel, you are fine. The second is cleanliness. Soap scum, a hair, or a bit of grit under the edge will create a tiny channel, and water will find it.\n\nWill it fit your drain?\n\nTake thirty seconds and measure. You want the diameter of the drain opening plus a good ring of flat surface around it, all sitting comfortably inside 13 cm.\n\nStandard bath drains, hand basins and kitchen sinks in most homes fall within that range. Where things get trickier is on shaped or recessed drains. If your basin has a deep dish around the drain hole, or a decorative raised collar, the plug may bridge across the gap and never make proper contact.\n\nThe other case worth checking is a basin that still has its pop-up stopper fitted. If that stopper sits proud of the surrounding surface even when open, the flat plug cannot lie down. On most basins you can simply unscrew and lift the old pop-up out, after which the flat plug works perfectly.\n\nA grate or crossbar in the drain is fine. The plug seals on the rim, not the hole, so what is happening underneath does not matter.\n\nWhy three plugs rather than one\n\nBuying a single plug fixes a single drain. The reason a three pack makes sense is that most homes have more than one drain with a problem, or at least more than one place where a plug is useful.\n\nThe common split is one in the bath, one in the kitchen sink for washing up or soaking a pan, and one in the hand basin for rinsing out delicates or shaving. If your kitchen sink already works properly, the third plug tends to end up in the laundry tub, which is often a plain round drain with no plug supplied at all. Some people keep the spare in a wash bag, since a best travel bath plug is the thing you only think about once you are standing in a hotel bathroom with a broken one.\n\nThree colours also helps in practice. Green for the kitchen, blue for the bath, grey for the basin, or whatever arrangement you prefer. It keeps the one that lives in the kitchen sink out of the bathroom.\n\nSilicone versus old rubber\n\nIf you have ever pulled an old rubber plug out of a drawer, you know what age does to it. The surface goes chalky, the edges crack, and the whole thing stiffens up until it no longer moulds to anything.\n\nSilicone behaves differently. It stays soft, which matters a lot for a plug that needs to conform to a surface that is rarely perfectly flat. It tolerates hot water and steam without complaint, and it does not develop that hard rubber smell. For a bathroom item that lives permanently in a wet environment, that durability is most of the argument.\n\nThere is a practical side to the softness too. A soft edge will settle over a very slight ridge or a shallow scratch in the enamel. A hard plug just sits on top of the high point and leaks.\n\nKeeping it working\n\nMaintenance here is close to nothing, but the little bit that matters is worth knowing.\n\nAfter a bath, wipe the plug with a cloth. Once in a while, wash it in warm water with a small amount of mild dish soap and rinse it properly. The rinsing part matters more than people expect, because leftover soap film on the sealing face is slippery in the wrong way and stops the suction grabbing.\n\nIf the plug suddenly stops holding, the fault is nearly always build up rather than wear. Clean the plug, clean the ring of surface around your drain, dry both, then re-wet the drain area and press the plug down again. In hard water areas, limescale on the drain surround is the usual culprit, and a mild descaler on the metal will sort it.\n\nStore it stuck to a vertical surface. The tiled wall beside the bath, the shower screen, or the inside of the tub all work. It dries out that way, and it never goes missing.\n\nKeep it away from knives and anything sharp in the kitchen sink, since silicone will take a cut, and keep it clear of open flame.\n\nWho this suits\n\nRenters get the most obvious benefit. You cannot replace a landlord's waste fitting, but you can drop a flat plug over it and have a working bath tonight.\n\nIt also suits anyone dealing with an older bathroom where the original parts have long since gone, anyone whose pop-up basin mechanism has given up, and anyone who is simply tired of chains snapping. Parents often like that there is no chain and no hard metal parts around a bath full of children.\n\nIf your existing plug works fine and seals properly, you do not need this. There is no point replacing something that is doing its job.\n\nThe short version\n\nA flat silicone plug solves a stubborn little problem by ignoring the part that usually causes it. No matching of brands, no hunting for a discontinued pop-up cartridge, no chain. Just a soft disc that covers the hole and a cup in the middle that holds it down and pulls it back up.\n\nMeasure the flat area around your drain, confirm it sits inside 13 cm, and you can be fairly confident. Three plugs in the pack means the bath, the basin and the kitchen are all covered, and there is usually one left over for the laundry or the travel bag. Rinse them now and then, store them stuck to a tile, and they will keep doing the job for a long time.", "llm_summary": "The Silicone Bath Plug 3 Pack from MR.SIGA is a set of three flat silicone drain stoppers in green, blue and grey. Each plug measures 13 cm across, with a listed product dimension of 13 cm wide by 15 cm high, and the set weighs 135 g. The plugs lie flat across a drain opening rather than inserting into it, and a moulded central suction cup holds the plug down and acts as a pull handle. They suit baths, hand basins, kitchen sinks and laundry tubs with openings within that size range, including drains missing their original plug. The manufacturer is Ningbo Shijia Cleaning Tools Co., Ltd., part number SJ21554, made in China. Exact plug thickness and depth are not specified by the maker.", "returnable": true, "return_policy": "14-day right of withdrawal from delivery under the Consumer Rights Directive 2011/83/EU, buyer pays the direct cost of return; two-year legal guarantee of conformity under Directive (EU) 2019/771 for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Drains Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://drains.eu.com/silicone-bath-plug-3-pack/", "canonical_url": "https://drains.eu.com/silicone-bath-plug-3-pack/", "json_url": "https://drains.eu.com/api/products/silicone-bath-plug-3-pack.json", "updated_at": "2026-10-12" }